Professional Seminar – Machinery 2018

23. 01. 2018 | Within AMPER 2018 trade fair there will be a cycle of professional seminars focusing on important information in the field of legislation, valid regulations and harmonized standards relating to the electrical equipment of machines.

The first day will focus mainly on the changes and differences between the “old” ČSN EN 60204-1 ed. 2:2007 and the “new” ČSN EN 60204-1 ed. 3:2018 (the standard will be published in 2018, be prepared). Also on the overall design of the electrical equipment of machines.

The second day will focus on the practical procedure for putting the operating machinery in compliance with the requirements of the Czech Government Regulation No. 378/2001 Coll. and related standards. We will take a practical machine which currently does not comply with the valid legislation and the Government Regulation No. 378/2001 Coll. and the Directive No. 2009/104/EC, and we will go through it methodically in accordance with the current Czech and European legislation.

It is possible to sign up for each day separately or for both days.

Date:

21 March 2018 – Requirements for the electrical equipment of machines according to the new standard ČSN EN 60204-1 ed. 3

22 March 2018 – Practical procedure for putting the operating machinery in compliance with the requirements of the Czech Government Regulation No. 378/2001 Coll. and related standards

Venue:

BVV Exhibition Grounds, Brno, Hall A3, Conference Hall Moravia

 

Program on 21 March 2018

Requirements for the electrical equipment of machines according to the new standard ČSN EN 60204-1 ed. 3 

 

9:00–9:20 Presentation

9:20–9:30 Opening of the seminar

9:30–10:15

Changes and differences between the “old” ČSN EN 60204-1 ed. 2:2007 and the “new” ČSN EN 60204-1 ed. 3:2018.

Scope of validity, ways of connecting and disconnecting of machinery.

Interface between fixed installation and machinery – i.e. between IEC 60364 and IEC 60204, requirements for main circuit breakers, disconnection, systems ensuring safe work on the equipment – LOTO or trapped key interlocks.

10:15–11:00

Requirements for protective measures and devices, connection and control circuits and functions, emergency stop or shutdown issues.

Protective circuits and conductors, issues of currents leaking through a protective conductor, application of PELV circuits of machinery, emergency functions from the point of view of standards laying down safety requirements.

11:00–11:15 Break

11:15–12:30

Requirements for the overall design of the electrical equipment of machines.

Installation of electrical circuits on machinery, marking of terminals, cables and conductors in accordance with documentation, marking and identification of equipment, basic documentation submitted to the customer.

Verification according to Chapter 18.

Inspection or revision – who, why and in what manner, required tests, frequency of inspections or revisions from the point of view of operators and the Czech Government Regulation No. 378/2001 Coll., qualification requirements, connection with a number of standards ČSN 33 2000.

12:30–12:45 Break

12:45–13:45

Links and references to other harmonized standards – ČSN EN 62061 or ČSN EN ISO 13849, ČSN EN ISO 13850, ČSN EN 61439, HD 60364-4-41 (ČSN 33 2000-4-41 ed.3), HD 60364-6 (ČSN 33 2000-6 ed. 2) and others.

13:45–14:00 Individual discussion and consultation with the lecturer.

14:00 Visit of AMPER 2018

 

Lecturer:

Filip Němeček, technical consultant in the field of machine safety, TÜV Functional Safety Technician 094/14

 

Program on 22 March 2018

Practical procedure for putting the operating machinery in compliance with the requirements of the Czech Government Regulation No. 378/2001 Coll. and related standards

9:00–9:20 Presentation

9:20–9:30 Opening of the seminar

9:30–10:15

Introduction of the Czech Government Regulation No. 378/2001 Coll., European Directive No. 2009/104/EC and introduction of the operating machinery.

Introduction to the legislative requirements of the repealed European Directive 89/655/EEC, which is incorporated in the legislation of the Czech Republic as the Czech Government Regulation No. 378/2001 Coll. and the current valid Directive 2009/104/EC.

Definitions of terms and minimum requirements for operating machinery according to the above-mentioned Directive and Government Decree of the Czech Republic.

10:15–10:30 Break

10:30–12:30

Assessment of safety and definition of deficiencies of the operating machine in accordance with both legislation (Czech Government Regulation No. 378/2001 Coll. and European Directive No. 2009/104/EC).

Proposal of machine protection measures, identification of hazardous sites, setting of the initial risk value before proposing appropriate measures and proposal of appropriate risk mitigation measures. Proposals for action and procedure to remedy identified deficiencies.

Procedures following existing harmonized standards.

12:30–12:45 Break

12:45–13:45

Emphasis on differences and impacts on operators.

Content and requirements for Local Safety Precautions (MPBP).

13:45–14:00 Individual discussion and consultation with the lecturer.

14:00 Visit of AMPER 2018

 

Lecturers:

Filip Němeček, technical consultant in the field of machine safety, TÜV Functional Safety Technician 094/14

Karel Stibor, Solution Architect Safety, TÜV Functional Safety Engineer 4224/11

 

 

View detailed organizational instructions and online application form

Back to list

AMPER 2017 - video report


AMPER on Facebook

Exhibition map


Home / Product news / News / Professional Seminar – Machinery 2018


26th International Trade Fair of Electrotechnics, Electronics, Automation, Communication, Lighting and Security Technologies

20.-23.3.2018

Venue: Brno Exhibition Centre


Main navigation:

Amper